Skip to main content

Canon iP2770 resetter (How to reset waste ink pad counter)



1. Enter "Service Mode"
  • Turn off the printer
  • Hold down "Resume button" then press "Power button"
  • Keep holding down Power button and let Resume button go
  • Press Resume Button 5 times while holding down the Power button
  • Then let BOTH buttons go.
  • You will see that the Alternate blinking error is gone, this means that the printer is in Service Mode State.


2. Using the Resetter
  • - Download the resetter here
  • - Extract the file
  • - Run Servicetool.exe
  • - Press "Main" button
  • - Press "EEPROM Clear", if pop up appear jusst click "OK"
  • - Power off the printer




Credit from this link http://pcmediks.blogspot.com/2010/10/how-to-reset-canon-pixma-ip2770.html

Done!.

Comments

Post a Comment

Popular posts from this blog

Bundy Clock Quick Setup Manual for IWATA TIME RECORDER CW-1A, CW-2A, CW-2SA

Recently, I bought IWATA bundy clock for our office and I'm happy because there is a Quick Setup Manual included in the package which is hard for me to find/download from the internet. Then I realized that it might be useful in the future so I decided to upload the manual here. Thanks,
2 comments
Read more

Bundy Clock Set Time (IWATA CW-1A)

if the time is advance    * Press "HO" button once to stop the timer    * Press "HO" button again to start the timer if the time is late    * Press "SY" to add 1 minute UPDATE: I have already a copy of Quick Setup Manual for IWATA Bundy Clock. CLICK HERE
2 comments
Read more

SONY Ericsson XPERIA E15i (HARD RESET)

METHOD 1: a. Turn off your phone b. Press and hold LEFT, RIGHT and POWER buttons until the factory reset menu appears c. Select Wipe Data d. Reboot/Restart your phone. METHOD 2: (proven effective) a. Download SONY PC COMPANION 2.1 here b. Install it into your PC and run the program c. On "SUPPORT ZONE" panel, click "Start" d. On  "Phone / Tablet Software update", click "Start" e. Click "Repair my Phone / Tablet" f.  Click "Continue" g. Tick the box "I understand.." and click "Next" h. Tick the box "I understood..." and click "Continue" i. Tick the box on "Battery Level Info" and click "Next" j. Select you phone model in the selection and click "Next" h. Connect you phone to PC       h-1. Turn off you phone and wait for 5 seconds      h-2.  Connect your Phone to the PC while pressing the Back Button (Left Button) using USB Cord. i. F...
2 comments
Read more