Skip to main content

Posts

Showing posts from November, 2014

Cherry Mobile S100 Cannot Detect Sim Fixed

I did hard reset of my phone, then after that i noticed that my sim card was not detected, on the phone status it shows "Serial No. = ERROR, EMEI1 = UNKNOWN, EME12 = UNKNOW. But thanks jamezon3_18 of http://www.symbianize.com I was able to bring back my phone to normal. Here's the step i did: Download Drivers Download EMMC Download Download this file BAK.qcn Connect your phone to you computer On USB debugging, select "Charging Only" on your PC, open device manager (you can see a Yellow Question Mark for Android) Right-click, then update driver, browse "..\drivers\USB Modem Driver\Win32", w8 until it finished. (you may skip this step if the driver is already updated.) Open EMMC_DownLoad_V1.2.4.ex e Click Restore_NV Browse the BAK.qcn Click "Open" Your phone will automatically turn off Turn on your phone and BINGO!.. Conclusion: Before doing anything like factory resetting, updating firmware etc. you must backup first t

Cherry Mobile S100 Hard Reset

1. Long Press Volume Up + Power Button . 2. Green Color Screen Appear, wait until it turn into red color before releasing the 2 buttons. 3. wait for a second until the the system recovery choices appear. 4. Use Volume UP and Down to navigate on the selection and Press Power button to select. 5. Select " Wipe data/factory reset " and press power button. 6. Select " Yes -- delete all user data " and press power button Thanks,

Invalid IMEI Error - Android Phone

I got this error after i flush the ROM. The only solution is to write it back, so this is what i tried. Before anything else, note down the imei of your phone - you can find it under the battery. Write/Change IMEI: OPTION 1: (Without Using Computer) Open Dialer Dial *#*#3646633#*#* Under Connectivity, Click "CDS information" Radio Information Select Phone1 (SIM 1) Click AT+ Type AT+EGMR=1,7,"YOUR SIM1 IMEI HERE" a message popup "Sent" Reboot you phone Repeat step 1-4 Select Phone2 (SIM 2) Click AT+ Type AT+EGMR=1,10,"YOUR SIM2 IMEI HERE" a message popup "Sent" Reboot you phone If you encountered problem from the above procedure like:  Nothing Happens after you dial those #'s. You cannot find CDS information Tab. Then, follow procedure below. OPTION 2: (Computer Unit is needed) Root your Phone ( See Rooting Android Phone Procedure here ) Download MTK_IMEI_Write_Tool to your computer Open the file Pre

How to ROOT your Android Phone

Follow the procedure below. Download Framaroot-1.9.3.apk to your phone. Install it. After install, Open Framaroot. Select "Install SuperSU" from action to execute field. Select either "Boromir" or "Faramir". if you failed on the 1st one, then select the other one until you get a message "success". That's all, now your phone is rooted!

(MYPHONE Ocean Mini) Stuck on Start Logo problem

Option 1: Hard Reset Press Volume UP + Volume Down + Power Button Select Recovery Mode Select Recovery Mode Again Wipe Data/Factory Reset Reboot the Phone If you encountered an error from the above procedure, try option #2 below. Option 2: Firmware Update Download needed files below on your computer and extract into a folder.     Mediatek MT65xx Preloader Driver     SP-Flash Tool v5.1352.01     MyPhone Agua Ocean Mini firmware  or this one  version 1.08 Connect you phone to your computer. ( Open Device Manager. Right-click "MT65XX..." and click "Update Driver Software". Select "Browse my computer for driver software". Click Next, then Finish. Open Mediatek folder the one that you extracted earlier. Open flash_tool.exe from SP Flash Tool folder Browse Download Agent File (i.e, MTK_AllInOnce_DA.bin) from SP Flash Folder Browse Scatter-Loading file (i.e, MT6572_Android_scatter_mtd_DH.txt) from Firware f