PTZ CCTV Controller (15-AU50H)/(3 Stage Joystic Speed Dome Controller)

* Activate Auto rotation (motion)

Open Menu Settings

Press "Call" Button
Press "9" Button
Press "5" Button
Press "Enter" Button

Select "< MOTION >" option using the Joystick

Note: Move the Joystick to the right to open the selected option

Select "< SCAN >" option

Select "< LEFT LIMIT >" option

This will be your starting point.
Press "ON" button to set

Select "< RIGHT LIMIT >" option

This will be your ending point
Press "ON" button to set

Select "< EXIT >" option

This will close the meu

So the settings has been set, to start the camera rotation

Press "Call" Button
Press "9" Button Twice - this will be 99
Press "Enter" Button

You can now see the camera is moving from the starting point to the end point.

That's All

Comments

Bundy Clock Quick Setup Manual for IWATA TIME RECORDER CW-1A, CW-2A, CW-2SA

Recently, I bought IWATA bundy clock for our office and I'm happy because there is a Quick Setup Manual included in the package which is hard for me to find/download from the internet. Then I realized that it might be useful in the future so I decided to upload the manual here. Thanks,

Bundy Clock Set Time (IWATA CW-1A)

if the time is advance * Press "HO" button once to stop the timer * Press "HO" button again to start the timer if the time is late * Press "SY" to add 1 minute UPDATE: I have already a copy of Quick Setup Manual for IWATA Bundy Clock. CLICK HERE

SONY Ericsson XPERIA E15i (HARD RESET)

METHOD 1: a. Turn off your phone b. Press and hold LEFT, RIGHT and POWER buttons until the factory reset menu appears c. Select Wipe Data d. Reboot/Restart your phone. METHOD 2: (proven effective) a. Download SONY PC COMPANION 2.1 here b. Install it into your PC and run the program c. On "SUPPORT ZONE" panel, click "Start" d. On "Phone / Tablet Software update", click "Start" e. Click "Repair my Phone / Tablet" f. Click "Continue" g. Tick the box "I understand.." and click "Next" h. Tick the box "I understood..." and click "Continue" i. Tick the box on "Battery Level Info" and click "Next" j. Select you phone model in the selection and click "Next" h. Connect you phone to PC h-1. Turn off you phone and wait for 5 seconds h-2. Connect your Phone to the PC while pressing the Back Button (Left Button) using USB Cord. i. F...

My Learning Experience

Search This Blog