My Learning Experience

References: http://support.microsoft.com/kb/305982/en-US http://www.technipages.com/outlook-cant-create-file-error-when-opening-attachment 1. Run REGEDIT.EXE 2. Navigate to "HKCU\Software\Microsoft\Office\14.0\Security" 3. On the right-pane, double click "OutlookSecureTempFolder" 4. Copy the value of OutlookSecureTempFolder 5. Open File Explorer 6. Paste the value onto addressbar, press enter 7. Delete all the content of that folder 8. Restart Outlook

Listview1 is the name of the listview control Private Sub ListView1_ColumnClick(ByVal ColumnHeader As MSComctlLib.ColumnHeader)     With ListView1         If .SortKey <> ColumnHeader.Index - 1 Then             .SortKey = ColumnHeader.Index - 1             .SortOrder = lvwAscending         Else             If .SortOrder = lvwAscending Then                 .SortOrder = lvwDescending              Else                  .SortOrder = lvwAscending             End If  ...

First, Create HTTPS service * Network -> Services * Add New -> Service name: HTTPS * Click Add * Click "Configuration" Button * Add New    - Protocol : TCP/UDP    - Source Port: ANY    - Destination Port: 443 * Click Add Second, Create Facebook Object * Network -> Objects * Add New -> Name: FACEBOOK * Click Add * Click "Members" Button * Add all these IP's        173.252.110.27     173.252.120.6     66.220.158.19     66.220.156.2     31.13.82.81 Third, Create Users Object * Network -> Objects * Add New -> Name: USERS * Click "Members" Button * Add all your users/clients/members Fourth, Create Firewall * Firewall -> Packet Filter * Filtering rules from internal networks to zentyal -> click "Configure rules" button    Add New   Decision: ACCEPT   Source: ANY   Service: HTTPS   Click Add * Filtering ru...

A BIG THANKS to Zulkifli Zain @ http://topupbisnes.blogspot.com/2013/05/s3850-upload-data-to-pc-problem.html 1. Download needed files and driver here. 2. Open "multiloader v.5.65.exe". 3. set it up like in the picture below. 4. Set your phone in DOWNLOAD MODE.     * Pull out battery     * Put battery In     * Press CALL,VOL+ AND POWER BUTTON until DOWNLOAD shown on the screen 5. Connect your phone to your computer through USB Cord. 6. Click "Port Search". 7. Click "Download" and w8 for about 15 minutes. 8. NOTE : NEVER TOUCH YOUR PHONE UNTIL YOUR PHONE RESTART BY ITSELF . 9. Done.

I did hard reset of my phone, then after that i noticed that my sim card was not detected, on the phone status it shows "Serial No. = ERROR, EMEI1 = UNKNOWN, EME12 = UNKNOW. But thanks jamezon3_18 of http://www.symbianize.com I was able to bring back my phone to normal. Here's the step i did: Download Drivers Download EMMC Download Download this file BAK.qcn Connect your phone to you computer On USB debugging, select "Charging Only" on your PC, open device manager (you can see a Yellow Question Mark for Android) Right-click, then update driver, browse "..\drivers\USB Modem Driver\Win32", w8 until it finished. (you may skip this step if the driver is already updated.) Open EMMC_DownLoad_V1.2.4.ex e Click Restore_NV Browse the BAK.qcn Click "Open" Your phone will automatically turn off Turn on your phone and BINGO!.. Conclusion: Before doing anything like factory resetting, updating firmware etc. you must backup first t...

1. Rename the extension of the file into .zip 2. Right Click then Extract. 3. Browse the folder where you extract the file. 4. Locate "...Filename\snote\snote.xml" 5. Right-Click snote.xml, and click open with... 6. Choose Microsoft Word. Thanks,

1. Long Press Volume Up + Power Button . 2. Green Color Screen Appear, wait until it turn into red color before releasing the 2 buttons. 3. wait for a second until the the system recovery choices appear. 4. Use Volume UP and Down to navigate on the selection and Press Power button to select. 5. Select " Wipe data/factory reset " and press power button. 6. Select " Yes -- delete all user data " and press power button Thanks,