Skip to main content

(MYPHONE Ocean Mini) Stuck on Start Logo problem


Option 1:
Hard Reset
  1. Press Volume UP + Volume Down + Power Button
  2. Select Recovery Mode
  3. Select Recovery Mode Again
  4. Wipe Data/Factory Reset
  5. Reboot the Phone

If you encountered an error from the above procedure, try option #2 below.

Option 2:
Firmware Update
  1. Download needed files below on your computer and extract into a folder.
  2. Connect you phone to your computer. (
  3. Open Device Manager.
  4. Right-click "MT65XX..." and click "Update Driver Software".
  5. Select "Browse my computer for driver software".
  6. Click Next, then Finish.
  7. Open Mediatek folder the one that you extracted earlier.
  8. Open flash_tool.exe from SP Flash Tool folder
  9. Browse Download Agent File (i.e, MTK_AllInOnce_DA.bin) from SP Flash Folder
  10. Browse Scatter-Loading file (i.e, MT6572_Android_scatter_mtd_DH.txt) from Firware folder
  11. Select "Download Only".
  12. Click Download button for press F9.
  13. Remove the battery of your phone while connected to the computer.
  14. Re-insert the battery.
  15. Press volume UP or volume Down while Pressing power button.
  16. Wait the progressbar reach 100%.
  17. Click OK when Finish and disconnect your phone from the computer.
  18. Perform Hard Reset again.


Thanks,

Comments

  1. AnonymousDecember 4, 2014 at 3:49 AM

    thanks a lot!!! :)

    ReplyDelete
  2. AnonymousDecember 10, 2014 at 9:25 PM

    sir 2nd step po pahelp

    ReplyDelete
  3. AnonymousDecember 13, 2014 at 5:45 AM

    wala epek sa phone ko :(

    ReplyDelete
    Replies
    1. jaypeeJanuary 5, 2015 at 7:34 PM

      try another version of firmware sir. i'll upload another version later.

      Delete
    2. jaypeeJanuary 5, 2015 at 8:51 PM

      https://www.mediafire.com/?urdrcfei931ecxk

      Delete
  4. AnonymousJanuary 7, 2015 at 10:15 AM

    Password Please

    ReplyDelete
  5. AnonymousJanuary 19, 2015 at 3:10 PM

    Sir bakit yung sa friend ko after ma flash eh hang na sa boot logo? - WoLF09

    ReplyDelete

Post a Comment

Popular posts from this blog

Bundy Clock Quick Setup Manual for IWATA TIME RECORDER CW-1A, CW-2A, CW-2SA

Recently, I bought IWATA bundy clock for our office and I'm happy because there is a Quick Setup Manual included in the package which is hard for me to find/download from the internet. Then I realized that it might be useful in the future so I decided to upload the manual here. Thanks,
Post a Comment
Read more

Bundy Clock Set Time (IWATA CW-1A)

if the time is advance    * Press "HO" button once to stop the timer    * Press "HO" button again to start the timer if the time is late    * Press "SY" to add 1 minute UPDATE: I have already a copy of Quick Setup Manual for IWATA Bundy Clock. CLICK HERE
2 comments
Read more

Windows CE install/update/upgrade/restore

Windows CE install/update/upgrade/restore to factory default. I am having a problem with my wireless book(Netbook or Pocketbook) w/ windows CE 6.0 it was stuck at "Loading Drivers" and nothing happens afterwards. The only solution i can think is to reinstall WinCE 6.0 Prepare:     - 1GB SD Card (Format it as Normal not Quick in FAT)       - Charge the battery of Netbook up to 100% (in my experience, installation may failed if low battery)     - Download  WinCE 6.0 or in http://www.poodwaddle.com/netbook/WinCE.rar      - Extract that file into SD Card root folder (when you open you SD Card in explorer you can see that there is folder named "Script".    - That's all for the preparation Procedure:     1. Turn-off Netbook     2. Insert the SD Card     3. Turn-on netbook     4. It will automatically read and execute the content of the SD Card     5. It will restart automatically and load the software package, and you can see ang windows deskto
1 comment
Read more